Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
SOMETHING NOT WORKING
Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is under guarantee. Before contacting your local Electrolux Service Force Centre, check the following points:
Symptom
No power to the appliance
Solution
Check there is power at the socket. Check there is not a power cut by checking the household lights. Check the fuse has not blown.
The light does not come on
Ensure that the bulb is correctly fitted. Replace the bulb if it has blown. Check the door light switch is not jammed.
The temperature in the fridge
Check the thermostat control knob in the fridge is turned to the correct setting relative to ambient conditions. Check the ambient temperature is within the appliance�s operating limits, please refer to the installation section in this instruction book. Relocate the appliance if necessary.
The compressor runs continously
Adjust the thermostat control knob to give correct temperature control. See �Setting the temperature�. Check that the door is closed. Large quantities of food have recently been placed in the cabinet and/or door is frequently opened. Check that air ventilation is not obstructed.
Noise Water under the salad crispers
Refer to normal operating sounds. Check the drain hole is not blocked. (see Maintenance and Cleaning).
If, after the above checks, there is still a fault, call your local Service Force Centre. In guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for any in-guarantee service calls.