Problem Connection of a decoder does not work or malfunctions
Possible cause a) The signal is not decoded because in the Main Information - Connect AV equipment - Decoder-channels - For decoder connected to AV ... the decoder channel locations are not marked in blue b) There is no sound in decoder mode because in the Main Information - Connect AV equipment - Decoder channels - Sound via AV socket ... is not set correctly a) In the Sound menu the item �Sound via �� under �Sound� is set to �hi-fi-system� b) In appliances with a 9-pin cubic socket at the rear, nothing is connected to this socket
Remedy a) In sub-item �For decoder connected to AV ...� mark the channel locations at which the decoder is necessary.
b) Correct setting (see decoder instructions).
No sound over the TV loudspeakers
a) Change setting to �TV�. b) Either a dummy plug with bridges or a Loewe Subwoofer has to be inserted in the cubic socket. Set your menu language: 1. Switch off Picture In Picture (PIP) and all fade-ins, press the E key 2. Call up the TV menu, press the M key 3. Select the last menu item and press the OK key 4. Select the last menu item on the last page and press the OK key 5. Now select the correct language and 6. ... confirm with OK. a) Log in the Digital Link Plus video recorder under �Connect AV equipment� and connect as shown in the diagram. b) Change the Euro AV cable c) Restore delivery condition of the video recorder (see operating instructions for the recorder) d) Re-allocate terrestrial and cable channels so that they are between 1 and 99.
All menus appear in the wrong language
Menu language was accidentally set incorrectly.
Digital Link Plus does not work
a) The video recorder was not logged in as a Digital Link Plus appliance or was connected to the wrong socket b) Euro AV cable not fully wired (pin 10 not wired) c) A few video recorders can only take over the station when the TV appliance is switched on for the first time d) All or a few terrestrial and cable channels are stored at channel locations � 99
Various characters are displayed incorrectly in teletext
The wrong character set was set in the teletext menu
Set the correct character set: Teletext Menu � Settings � Standard or the corresponding character set for your language.
15
