Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
Filling with Rinse Aid
Rinse aid ensures that your dishes gleam and are free from spots, and that you glasses are clear.
1
Use only branded rinse aid for dishwashers. Never fill the rinse aid container with any another substance (e.g. concentrated vinegar). This would damage the appliance.
Fill with rinse aid:
� � Prior to using the dishwasher for the first time. When a dark point surrounded by a light ring is to be seen in the indicator window on the container. If there is sufficient rinse aid in the container, the indicator window is uniformly dark.
The rinse aid container is on the inside of the dishwasher door. 1. Open the door . 2. Turn the lid of the container ¼ of a turn anticlockwise and remove.
3. Fill with rinse aid, up to the broken line as a maximum; this line corresponds to a quantity of approx. 150 ml . 4. Replace the lid and tighten by turning clockwise. 5. If rinse aid has been spilt, wipe up with a cloth. Otherwise there will be too much foam during washing.
ax
m
1
654
3 2
Adjusting Rinse Aid Dosing
3
Rinse aid is added to the wash water from the container when the dishes are rinsed. The dose can be adjusted from 1-6, corresponding to 1-6 cm3 rinse aid. The dose is
1. 2. 3. 4. 10
set to "4" in the factory. Only change the dose when streaks, milky spots or dried water drops are to be seen on glasses and dishes. (see under "What to do, if..."). Turn the lid of the container ¼ of a turn anticlockwise and remove. Adjust the dose setting with a tea spoon. Replace the lid and tighten by turning clockwise. If rinse aid has run out, wipe up with a cloth.
