WHIRLPOOL ET14JMXAN10
Instrukcja Obsługi

Using

the automatic

ice maker
and ET14GK,

(ODtional on ET14JK. ETl4HJ *a&tory-installed on ET14JM)

If you have an automatic ice maker, or if you plan to add one later (contact dealer for ice maker kii number), there are a few things you will want to know: l For ET14JK, ET14HJ and ET14GK: The aluminum water inlet tube, supplied with your refrigerator, is in the rear bottom of the refrigerator, on the compressor support plate. Use this tube instead of the tube provided in the accessory kit. l The ON/OFF lever is a wire signal arm. DOWN to make ice automatically UP to shut off the ice maker IMPORTANT: Do not turn ice maker on until it is connected to the water supply.

up to stop ice maker. Down to stsrt ice maker.

Instructions for ice maker water supply hook up are attached to the back of the refrigerator cabinet.
l

l

The dial or lever on the side of the ice maker changes the size of the cubes. Good water quality is important for good ice quality. Try to avoid connecting the ice maker to a softened water supply. Water softener chemicals, such as salt from a malfunctioning softener, can damage the ice maker mold and lead to poor ice quality. If a softened water supply cannot be avoided, make sure that the water softener is well maintained and operating properly.

10