Reversing the door swing.. .
You can change the hinges on your refrigerator so the doors open the other way. Refer to the instruction sheet included with your refrigerator.
Removing the base grille...
Support
Tabs
lace:
1. Line up grille support tabs with metal clips, 2. Pull grille outwards as shown, 2. Push firmly to snap into place 3. DO not remove Tech sheet fastened behind gri tie. 3. Close the doors.
Changing the light bulb...
WARNINB: Before removing the light shield for cleaning or refrlgemtor the bulb either unplug for replacing or dircori nect electricity leadlng to refrlgemtor at the main power supply Shock and lnjuy can occur lf elec: trlctty remains connected.
1. Push lightly on the top center of the light shield until the notched tab unhooks from the control panel. 2. Pull down on the shield until the tab clears the control panel. 3. lift the back hooks out of their slots. 4. Replace with a cl&watt appliance bulb. 5. Replace light shield in reverse order.
Pull Down. lr-nwaa
I
Ice cube trays...
If cubes ore not used. they may shrink. The moving cold air Starts a slow evapocotion, The longer cubes are stored, the smaller they get, $, ;;;Jdya;both
