WARNING: To avold possible shocks, tlrst unplug treezer or turn off electrlclty leadlng to freezer at the maln power supply.
I, Remove the light shield from the side of the control panel. Depress the back of the shield to release the tabs, then pull away 2. Replace bulb with a 40.watt appliance bulb. 3. Replace the light shield. Insert the shield tabs in the slots, then press the shield to snap into place. 4. Plug in power cord or switch on electricity
Removing the bottom trivet...
To remove:
I. Lift front of trivet out of supports. 2 Pull out.
Lift the Front, Then Pyll Out
To replace:
1 Position back of trivet on the rear wall supports. 2 Lower front into place.
Energy saving tips...
l
l l
You can help your freezer use less electrtcity Check door gasket and level freezer to assure a good door seal. Clean the condenser coils regularly Keep door openings to a minimum Remove several items at one time. Keep contents organized to eliminate searchrng. Fill to capacity Follow recommended procedures for freezing foods See pages 8 and 9.
l
l l
Set Temperature Control to provide temperatures around 0°F ( ~ 17.8 �C) There is no need to store foods below 0°F Keep door locked to ensure door closure. Do not let frost build up to more than �/4 inch (6 mm] thick Efficiency is reduced. Keep Power Saving Control on OFF when humidity is low
