Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
02
Connecting up
� Try not to place the surround speakers further away from the listening position than the front and center speakers. Doing so can weaken the surround sound effect. � Make sure all speakers are installed securely to prevent accidents and improve sound quality. � Do not attach these speakers to the wall or ceiling. They may fall off and cause injury.
Important � Use speakers with a nominal impedance of at least 16 �. � Make sure you connect both surround speakers or you won�t be able to hear anything from the surround jacks.
Attaching the surround speakers to the speaker stands
EV7DVD model only If you have set up your system using the Front surround 3-spot setup (as explained in Home theater sound setup on page 21), it is necessary to use the speaker stands provided. Using the speaker stands for the Standard surround 5spot setup is optional. Attach each speaker as shown in the steps below. 1 Line up the spurs on the speaker stand with the holes on the back of the surround speaker and press into place.
R L SURR OUN D
Connecting the radio antennas
Connecting the supplied antennas will allow you to listen to both AM and FM radio broadcasts. If you find that reception quality is poor, an outdoor antenna should give you better sound quality�see Connecting external antennas below for more on how to do this.
fig. a fig. b fig. c
2 With the spurs fixed in place, pull the speaker downward to secure it on the stand.
1 2
ANTENNA AM LOOP ANTENNA
5
Optional surround speaker connections
EV5DVD model only Using RCA speaker cables, you can connect surround speakers to the left and right SURROUND speaker jacks on the rear panel for multichannel sound from this system. For the best surround effect, place the surround speakers slightly above ear level and at the same distance from the listening position as the front speakers.
