EMERSON EWC09D5B
Instrukcja Serwisowa

17. SLEEP Button [page 15] Sets the sleep timer. 18. REV h Button [page 20] Hit to fast reverse the Disc. Hit [PAUSE F], then hit this button to begin slow motion playback. Hit this button repeatedly to change the reverse speed of slow motion. FWD g Button [page 20] Hit to fast forward the Disc. Hit [PAUSE F], then hit this button to begin slow motion playback. Hit this button repeatedly to change the forward speed of slow motion. 19. V.SURR (VIRTUAL SURROUND) Button [page 24] Hit to set virtual surround on/off. 20. SETUP Button [pages 16, 26-28] Hit to enter or exit the setup menu of TV or DVD. 21. TITLE Button [page 19] Displays the title menu. 22. CLEAR Button [pages 21-22] Hit to clear or cancel a setting currently entered. 23. DISPLAY Button TV Mode: Hit to display the channel number on the screen. If you hit it again, the channel number will disappear. DVD Mode: [page 25] Displays the current status on the TV screen. 24. SEARCH MODE Button [page 21] Hit to locate a desired point. 25. AUDIO Button [page 23] Hit to select a desired audio language or sound mode. 26. SUBTITLE Button [page 23] Hit to select a desired subtitle language. 27. REPEAT Button [page 22] Repeats playback of the current disc, title, chapter or track. 28. ANGLE Button [page 24] Hit to change the camera angle to see the sequence being played back from a different angle (if available). 29. A-B Button [page 22] Repeats playback of a selected section.

30. RETURN Button [page 21, 24] Returns to the previous screen in the setup menu. 31. ENTER Button [pages 14, 19] Hit to accept a setting. 32. K / L / s / B Buttons TV Mode: [page 14] Press to select a setting mode from the menu on the TV screen. Press to select or adjust from a particular menu. DVD Mode: [page 19] Press to select a menu item. 33. DISC MENU Button [page 19] Calls up the DVD menu. 34. SELECT Button [pages 11, 19] Hit to change to TV mode, external input mode or DVD mode. When you select the DVD mode by this NOTE: button, press [PLAY O] or [OPEN/CLOSE A] first. Otherwise, the DVD features are not operated. 35. MUTE Button Mutes the sound. (Volume level display turns LIGHT RED from LIGHT BLUE.) Hit it again or press [VOL. X / Y] to restore sound. 36. PICTURE Button [page 15] Hit to enter picture adjustment mode. 37. Power cord Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to avoid breaking a wire before you connect to a standard AC outlet. 38. COAXIAL Jack (DVD Audio Only) Connect to the digital input of an external amplifier or decoder. 39. ANT(ENNA). Jack Connect to an antenna, cable system, or satellite system. 40. DC 13.2V Jack Connect to the Car Battery Cord.

INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2)Insert 2 �AA� penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3)Replace the cover. [BATTERY PRECAUTIONS] � Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. � Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones.

� If the device is not to be used for a long period of �
�9�

time, remove the batteries to prevent damage or injury from possible battery leakage. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
EN