CHANNEL SET UP
TV
You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the unit channel selector to the output channel of the cable box or satellite box (Ex CH3), then select the channel to be viewed on the Cable Box or Satellite Box. Make sure ... � Hit [POWER] to turn on the unit.
1
Plug in the unit power cord
Plug the unit power cord into a standard AC outlet. NOTE:
� If any digits appear in the corner of
the screen, hit [POWER] without unplugging the power cord. Make sure ... � Hit [POWER] to turn on the unit. NOTE: � This function effects only the language on the screen menu and not the audio source.
1
Select �CHANNEL SET UP�
- TV SETUP B CHANNEL SET UP V-CHIP SET UP
2
Select �LANGUAGE�
- TV SETUP CHANNEL SET UP V-CHIP SET UP B LANGUAGE [ENGLISH] CAPTION [OFF]
Hit [SETUP] on the remote control. Press [K/L] to point to �LANKL GUAGE�.
Hit [SETUP] on the remote control. Press [K/L] to point to �CHANKL NEL SET UP�. Then hit [ENTER].
LANGUAGE [ENGLISH] CAPTION [OFF]
2 3
Select �ENGLISH�, �ESPA�OL� or �FRAN�AIS�
Begin auto ch programming
� CHANNEL SET UP � ADD / DELETE CH (CATV) B AUTO CH PROGRAMMING
Select �ENGLISH�, �ESPA�OL�= Spanish or �FRAN�AIS�= French using [ENTER].
Press [K/L] to point to �AUTO CH KL PROGRAMMING�. Then hit [ENTER]. The tuner scans and memorizes all the active channels in your area.
4
Exit the Language mode
Hit [SETUP] to return to TV mode. NOTE: If for some reason the menu is in Spanish or French, press [K/L] to point to �IDIOMA KL [ESPA�OL]� or �LANGAGE [FRAN�AIS]�, then hit [ENTER], then hit [SETUP] on the remote control.
3
After scanning
The tuner stops on the lowest memorized channel. � When AUTO CH PROGRAMMING is activated where there is no TV signal input, �NO TV SIGNALS� will appear on the display after the completion of the channel scanning. � The unit may recognize CATV channels to be TV channels by the receiving conditions. In this case, try auto ch programming again in the fine receiving conditions.
NO TV SIGNALS