You can alter the programme before it starts. When the programme has started, you can only reset it by turning the programme selector dial to O and then you can select the new programme. Start it by depressing the START/PAUSE button .
12. Interrupting a programme 8. Select the desired options
The light corresponding to the depressed button illuminates. Depress the START/PAUSE button to interrupt a programme which is running, the corresponding light starts to flash. Depress the same button again to restart the programme.
13. Cancelling a programme
Turn the selector dial to «0» to cancel a programme which is running. Now you can select a new programme.
14. How to open the door after the programme has started
9. Select the DELAY TIME
To delay starting of the programme, press the DELAY start button. The figures corresponding to the selected delay will be displayed for about 3 seconds, after which the duration of the selected programme will appear on the display.
First set the machine to PAUSE by pressing the START/PAUSE button. If the door does not open, this means that the machine is already heating, that the water level is above the bottom edge of the door or that the drum is turning. If you cannot open the door but you need to open it you have to switch the machine off turning the selector dial to 0 . After about 3 minutes the door can be opened (pay attention to the water level and temperature!). To restart the programme switch on the machine and select again the desired programme and options.
15. At the end of the programme
During this period it is possible to load other laundry: � depress START/PAUSE button; � load the laundry; � close the door and depress START/PAUSE button again. The washing machine stops automatically. If the Rinse hold option has been selected, the light of the START/PAUSE button goes off, and remain lit, to indicate that the water must be drained before opening the door. The display shows a flashing zero. Turn the programme selector dial to Reset O to switch the machine off. Remove the laundry from the drum and carefully check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells. 16
10. Start the programme
Press the START/PAUSE button . The relevant light will stop flashing. and only the light relevant to the phase that is in progress will remain lit. If you have chosen a delayed start, the washing machine will begin the countdown. The display will show the duration of the programme or the selected delay.
