Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 17 (kliknij aby zobaczyć)
Operating sequence
Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
4. Switch the machine ON
Turn the selector dial to the desired programme to switch the appliance on. To switch the appliance off turn it to «O».
1. Place the laundry in the drum
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. Turn the selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on.
5. Select the desired programme
P0004
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out a programme with prewash, pour detergent into the appropriate compartment marked . The duration of the programme appears in the display.
6. Select the temperature
Press the Temperature button if you wish to select a temperature value different from the one proposed by the washing machine. The relevant light will light up.
90° 60° 30° 40°
3. Measure out the additives
If required, pour fabric softener into the compartment marked marked and the bleach into the compartement , without exceeding the «MAX» mark.
