EMERSON EWFG2705
Instrukcja Obsługi

3

Set the AUTO PRESET CH. NOTES:
� If "D.S.T. (Daylight Saving)" and "TIME ZONE" is not set, you cannot select "AUTO PRESET CH". � Make sure if the TV is connected to antenna or cable. When antenna is connected, select �AUTO PRESET CH (TV/DTV)� at the procedure below. When connected to CATV, select �AUTO PRESET CH (CATV)�.

MENU SCREEN
This section describes the overview of the MENU screen displayed when you press [MENU]. For more details, see the reference page for each item. The MENU screen consists of the function setting items below.
PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

Here describes the case for searching and memorizing channels for DTV/TV. � Using [CH K/L] on the remote control, select "AUTO PRESET CH(DTV/TV)".
1. PLEASE CONNECT ANTENNA TO THE UNIT. 2. SET UP THE ITEMS WITH , AND BUTTONS. D.S.T. (Daylight Saving) [ON] TIME ZONE [ALASKA] AUTO PRESET CH(DTV/TV) AUTO PRESET CH(CATV)

� PICTURE You can adjust the picture quality (BRIGHT, CONTRAST, COLOR, TINT, SHARPNESS). (Refer to "PICTURE ADJUSTMENT" on page 20.) � CHANNEL SET You can automatically scan the receivable channels and add or delete the channel as necessary. (Refer to "AUTO PRESET CH" on page 28.) � ENG/ESP/FRA You can change the language (ENGLISH, SPANISH, FRENCH) displayed in the MENU screen. (Refer to "LANGUAGE SELECTION" on page 15.) � V-CHIP SET UP You can set the viewing limitations. (Refer to "V-CHIP" on page 24.) � CAPTION You can change the display format for CLOSED CAPTION, which displays the dialogue of a TV program or other information across the screen. (Refer to "CLOSED CAPTION" on page 21.) � DTV SET UP
DTV

� When you press [VOL X] on the remote control, scanning the channels in both analog and digital modes will automatically start.

AUTO PRESET CH:DTV/TV

� When scanning is completed, the memorized smallest channel will be displayed.
� The initial AUTO PRESET CH function can be executed for either DTV/TV or CATV only once. If you want to scan both DTV/TV and CATV, you need to select "CHANNEL SET" in the MENU screen to scan and memorize another channels after initial presetting is completed. (Refer to page 28.) � You can exit the initial AUTO PRESET menu by [MENU] on the remote control. � When you press [MENU] while scanning, the scanning is interrupted and the memorized smallest channel is displayed. � If you press [POWER], the power will be turned off. When the scanning is not completed, initial AUTO PRESET CH screen is displayed every time you turn on the power. � When no channel can be received by AUTO PRESET CH, "NO TV SIGNALS" is displayed on the screen.

NOTES:

You can set the screen display or CAPTION in the DTV mode. (Refer to "CHANGING THE SCREEN DISPLAY MODE" on page 19.) NOTES:
� "DTV SET UP" can be displayed only in the DTV mode. � To move to the normal screen, press [MENU].

NO TV SIGNALS

14
EN