Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 11 (kliknij aby zobaczyć)
No spin By selecting this option the spinning phases are suppressed. This function is not available for cotton and linen. To be selected for extremely delicate items.
9 Extra rinse button
Can be used with all programmes except the wool programme. The machine performs 4 rinses instead of 3. This option is recommended for people who are allergic to detergents and in areas where the water is very soft.
6 Prewash button
The machine performs a prewash cycle at 30°C max. The prewash cycle ends with a short spin at 650 r.p.m. in programmes for Cotton and Synthetics, and with emptying of the water for Delicates. This option is not available with the wool programme. For use when washing heavily soiled laundry.
10 START/PAUSE button
7 Quick wash button
By pressing this button the washing time is reduced as follows: � 55 minutes for cotton 95°C � 66 minutes for cotton 60°C � 76 minutes for cotton 40°C � 28 minutes for synthetics � 8 minutes for delicates This option is not available with the wool programme and the Energy saving programme. To be used for lightly soiled laundry. This button has three functions: Start - Pause - Draining of water. Start After having selected the required programme, press this button to start the machine; the corresponding pilot light stops flashing. Pause To interrupt a programme which is running, depress the Start/Pause button: the corresponding pilot light starts to flash. To restart the programme from the point at which it was interrupted, press the START/PAUSE button again. Draining of water By depressing the Start/Pause button � The water of programme �A� (Soak) is emptied out � The water of the last rinse on programmes with Anti-crease option is emptied out and the laundry is spun.
8 Anti-crease button
By selecting this option the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the pilot light of the START/PAUSE button flashes to indicate that the water must be emptied out. To empty out water there are 3 possibilities: � Select programme �D� (draining): The water is emptied out without spinning. Attention! Before selecting programme �D� the selector dial has to be positioned on O (cancelling). � Depress START/PAUSE button : after emptying, the machine performs the spin cycle corresponding to the type of fabric previously selected. � Select the spin speed by means of the relevant button and then depress the START/PAUSE button.
