EVENT EZBUS
Instrukcja Obsługi

84

TUTORIAL 3: EZBUS AS A DIGITAL MIXER

Use the VALUE wheel to enable the EQ.

Bypassed
The display will now show:

Enabled

Channel 1 EQ Status: Enabled
The EQ is now enabled, so let�s start by adjusting the frequency. Press the NEXT button repeatedly until the display shows:

Channel 1 Mid-Sweep Frequency: 1000Hz
The frequency parameter is used to precisely dial in to the target frequency. We want to select 250Hz, so turn the VALUE wheel until the display shows:

Channel 1 Mid-Sweep Frequency: 250Hz
Now we�ll add the 6dB of gain. Press the NEXT button. The display will show:

Channel 1 Mid-Sweep Cut/boost: +00dB