Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 84 (kliknij aby zobaczyć)
84
TUTORIAL 3: EZBUS AS A DIGITAL MIXER
Use the VALUE wheel to enable the EQ.
Bypassed
The display will now show:
Enabled
Channel 1 EQ Status: Enabled
The EQ is now enabled, so let�s start by adjusting the frequency. Press the NEXT button repeatedly until the display shows:
Channel 1 Mid-Sweep Frequency: 1000Hz
The frequency parameter is used to precisely dial in to the target frequency. We want to select 250Hz, so turn the VALUE wheel until the display shows:
Channel 1 Mid-Sweep Frequency: 250Hz
Now we�ll add the 6dB of gain. Press the NEXT button. The display will show:
