AEG FAV50850
Instrukcja Obsługi

Free-standing appliances

1

If the dishwasher is installed directly next to a cooker, a heat-insulating, non-flammable panel (laminated with aluminium foil on the side next to the cooker) must be fitted flush with the top edge of the work surface (depth 57.5 cm). If the appliance is built-in under a kitchen work surface, the worktop supplied with the dishwasher can be removed in the following way: 1. Unscrew the screws from the elbows at the rear (1). 2. Push the appliance�s worktop backwards about 1 cm (2).

3. Lift the worktop at the front (3) and remove it.

1 3

If the dishwasher is later used as a free-standing appliance, the work surface supplied with it must be re-mounted. The plinth on free-standing appliances is not adjustable.

32