RICOH FAX3700L
Instrukcja Serwisowa

August 2nd, 1995

TROUBLESHOOTING COPY QUALITY TROUBLESHOOTING

6.1.8. Horizontal White Lines

H516T509.wmf

H516T511.wmf

Possible Cause (Printer) � The surface of the development roller is damaged or deformed. � The development bias is not stable. � Transfer current is not stable. Action: 1. Print a test pattern, and open the cover in the middle of printing. 2. Check if horizontal white lines (where toner is not adhered) appear on the drum surface or not. � If they do, go to step 3. � If not, check the transfer roller surface and the transfer bias terminals connections. If they are OK, check or replace the power pack. 3. Check if horizontal white lines (where toner is not adhered) appear on the development roller surface or not. � If they do, check if the development roller surface is not deformed. If it is OK, check or replace the power pack. � If not, check for damage on the drum surface.

6-9