CANON FAXB155
Instrukcja Serwisowa

FAX-B155

5.GUIDE

TO REPLACEMENT

FIGURE 2-a

Se;;ge

FIGURE 2-b

See Page 2-3

Open the scanner unit, and after removing the two screws When removing the SCANNER UNIT, insert a screwdriver that hold the �Cover, Logic Board� in place, insert a into the holes at the right and left of the SCANNER BASE screwdriver, as shown at 2 in the illustrat-ion above, and prise UNIT, and break the tabs. Then slide the Scanner Unit in the cover free from the tabs, and remove it. Pay attention when removing the cover so as to avoid trapping the flat cable inside. the direction of the arrows.

FIGURE 3-a

Se>Tge

FIGURE 3-b

See Page 2-5

When removing the COVER, MAIN (Front), 1 remove the tabs at the upper right and left, and insert a screwdriver, as illustrated above 2, so that the cover is prised loosed, remove the tabs at point 3, with a flat bladed screwdriver.

When attaching the COVER, MAIN (Front), shown above on to the Lower Cover Unit.

clip the tabs

5-1