Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 36 (kliknij aby zobaczyć)
Patch Mode
When Setting System Exclusive Messages
1
Press PARAMETER [
MIDI Message
][
] to move the cursor to the MIDI message.
MIDI Channel
Message Number
Data
2
Press VALUE [
][
] to select the �SYSEX.�
3
Press [WRITE] to display the advanced editing screen.
The maximum amount of data
4 5
that can be saved to a system exclusive message is 256 bytes.
Press PARAMETER [ change.
][
] to move the cursor to the data you want to
With Roland System Exclusive messages, moving the cursor to the message in front of F7
Press VALUE [
][
] to change the value.
6
If you want to add a data, use PARAMETER [ ][ ] to move the cursor to the position where you want to make the addition, then press [INS]. If you want to delete a data, use PARAMETER [ ][ ] to move the cursor to the position where you want to delete, then press [DEL]. Repeat steps 4�6, edit the data.
(the end of the transmitted data) and pressing [WRITE] performs a checksum and inserts it there.
7 8
When you have finished with the editing, press [EXIT].
After making the changes, follow the instructions in �Storing (Saving) Patches� (p. 44) to save the MIDI messages to a patch.
