ROLAND FC-300
Instrukcja Obsługi

Patch Mode

When Setting System Exclusive Messages

1

Press PARAMETER [
MIDI Message

][

] to move the cursor to the MIDI message.

MIDI Channel

Message Number

Data

2

Press VALUE [

][

] to select the �SYSEX.�

3

Press [WRITE] to display the advanced editing screen.

The maximum amount of data

4 5

that can be saved to a system exclusive message is 256 bytes.

Press PARAMETER [ change.

][

] to move the cursor to the data you want to
With Roland System Exclusive messages, moving the cursor to the message in front of F7

Press VALUE [

][

] to change the value.

6
If you want to add a data, use PARAMETER [ ][ ] to move the cursor to the position where you want to make the addition, then press [INS]. If you want to delete a data, use PARAMETER [ ][ ] to move the cursor to the position where you want to delete, then press [DEL]. Repeat steps 4�6, edit the data.

(the end of the transmitted data) and pressing [WRITE] performs a checksum and inserts it there.

7 8

When you have finished with the editing, press [EXIT].

After making the changes, follow the instructions in �Storing (Saving) Patches� (p. 44) to save the MIDI messages to a patch.

36