7. Select the spin speed or the RINSE HOLD option
Press the SPIN SPEED button repeatedly, in order to select the desired spin speed or the RINSE HOLD option. The relevant light will light up. If you select the RINSE HOLD option, the machine will stop at the end of the programme with the water still in the tub.
1000 900 700 500
10. Start the programme
Press the START/PAUSE button . The relevant light will stop flashing, the DOOR LOCKED light will light up, and only the light relevant to the phase that is in progress will remain lit.
11. How to change a programme during its cycle 8. Select the desired options
If your laundry is very dirty, it may be advisable to select the PREWASH option. If you wish the laundry to undergo an extra rinse, select the SUPER RINSE option. Press the OPTIONS button so as to cause one or both of the lights to light up. Before you make any change, you must pause the washing machine by pressing the START/PAUSE button. It is possible to change any phase before the programme carries it out. Changing the type of fabric or temperature is possible, obviously, only during the washing phase. When you make a change in these two parameters, the washing machine will resume the cycle from the beginning. If it is necessary to drain the water in order to change the programme in progress, proceed as follows: � PAUSE the machine by pressing the START/PAUSE button; � press the SKIP/RESET button repeatedly, until only the DRAIN light remains lit;
Depress button to select the QUICK WASH option, if your laundry is only slightly soiled. The relevant light illuminates.
17
ENGLISH
9. Select the QUICK WASH option
� press the START/PAUSE button again. When the water has been drained, you may select a new programme and press the START/PAUSE button to start it.