11 DELAY (INICIO DIFERIDO) button
This button makes it possible to delay the starting of the programme by up to 23 hours. The delay you have selected is shown on the display for about 3 seconds; afterwards, the duration of the programme reappears. If the SOAK button has been pressed the selected delay will correspond to the soak time. If no delay time is selected the programme will last about 30 minutes. You must select this option after you have set the programme and before you press the START/PAUSE button. The time value shown on the display will decrease by one unit every hour. You can change the delay time at any moment, before you press the START/PAUSE button. If you have already pressed the START/PAUSE button, and you wish to cancel the delay time, proceed as follows: � set the washing machine to PAUSE by pressing the START/PAUSE button; � press twicw the DELAY button until the display shows o� and then press the START.PAUSE again. To change the delay time, after the programme had started, you have to set the programme again. Important! The door will be locked throughout the delay time (DOOR LOCKED light lit). If you need to open the door, you must first set the washing machine to PAUSE by pressing the START/PAUSE button. After you have closed the door, press the START/PAUSE button again.
12 Programme phase indicator lights
When you select a programme, the lights relevant to the phases that form the programme light up.
PRELAVADO LAVADO ACLARADOS CENTRIFUGADO
DESCARGA
After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit. 38
