Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 263 (kliknij aby zobaczyć)
1-2.
Removal of the Punch Unit
1. Remove the Upper Cover. 2. Unplug two connectors.
4643D002AA
3. Remove two screws and the Punch Unit.
4643D003AB
NOTE When reinstalling the Punch Unit, ensure that part A of the gear on the Finisher fits into the slit in the gear of the Punch Unit. Clutch
4643D018CA
1-3.
Removal of the Stapling Unit
1. Holding both sides of the cover, lift the cover up and take it off.
4643D004AC
2. Remove one screw and remove the Stapling Unit from the moving cradle. 3. Remove the screw, unplug the connector, and remove the Stapling Unit.
