jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
FO-4500GR 6. Installing an option cassette (FO-45A4)
1 Remove the two screws on the rear side of the optional cassette,
and then remove the rear plate of the optional cassette.
7. Installation of the RS232C I/F PWB unit (FO-45RS)
1 Open the printer compartment cover, and remove the two screws
shown. Remove the three screws shown on the side of the machine.
2Place the fax machine on top of the optional cassette. Connect the
connector on the optional cassette to the wire connector on the bottom of the fax.
2 Open the original document tray, and remove the three screws shown.
3Replace the rear plate on the optional cassette, and secure it with
the two screws.
3 Remove the paper tray by pulling the front cover out slightly and then
pulling the tray out and up as indicated by the arrows.
4 Secure the optional cassette to the fax machine with two screws on
the front and one screw on each side.
4 Remove the side cover by pulling it down slightly so that the tabs on
the bottom edge of the cover come out of the holes in the metal frame. Pull the side cover slightly to the left as well so that the tab on the left side of the side cover comes out of the hole in the frame.
