6. Select the temperature
Press the TEMPERATURE button if you wish to select a temperature value different from the one proposed by the washing machine. The relevant light will light up.
95°C 60°C 50°C 40°C 30°C
S
R
D
Select the OPTIONS button so as to cause one or two lights to light up.
9. Start the programme
Press the START/PAUSE button. The relevant light will stop flashing, the DOOR LOCKED light will light up, and only the light relevant to the phase that is in progress will remain lit.
EM
P
ER ATU
E
D
7. Select the spin speed or the RINSE HOLD option
Press the SPIN SPEED button repeatedly, in order to select the desired spin speed or the RINSE HOLD option. The relevant light will light up. If you select the RINSE HOLD option, the machine will stop at the end of the programme with the water still in the tub. FR 1250 W FR 1250 S FR 1450 W
1200 900 700
RINSE HOLD
PIN S P EE
8. Select the desired options
If your laundry is very dirty, it may be advisable to select the PREWASH option. If you wish the laundry to undergo an extra rinse, select the SUPER RINSE option. If your laundry is only slightly soiled, select the EXTRA QUICK option.
PREWASH SUPER RINSE EXTRA QUICK
O P TI ON S
T
S TA RT/PA U S E
10. How to change a programme during its cycle
Before you make any change, you must pause the washing machine by pressing the START/PAUSE button. It is possible to change any phase before the programme carries it out. Changing the type of fabric or temperature is possible, obviously, only during the washing phase. When you make a change in these two parameters, the washing machine will resume the cycle from the beginning. If it is necessary to drain the water in order to change the programme in progress, proceed as follows: � PAUSE the machine by pressing the START/PAUSE button; � press the SKIP/RESET button repeatedly, until only the light remains lit; � press the START/PAUSE button again. You may now select a new programme and press the START/PAUSE button to start it.
1400 1200 900
RINSE HOLD
500
700
PIN S P EE
S
11. How to cancel a programme during its cycle
To cancel a programme that is being carried out, first pause the washing machine by pressing the START/PAUSE button, then press the SKIP/RESET button repeatedly, until the phase indicator lights go out.
