AIWA FR-AP77
Instrukcja Obsługi

d

ENGLISH
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

FR-AP77W
RADIO RECEIVER RECEPTOR DE RADIO

OWNER�S RECORD
For your convenience, record the model number and the serial number (you will find it in the battery compartment of your set) in the space provided below. Please refer to them when you contact your Aiwa dealer in case of difficulty. Model No. FR-AP77W Serial No.

OPERATING INSTRUCTIONS INSTRUCCIONES DE MANEJO MODE D�EMPLOI

A

8A-RU8-901-01 001017AYO-OX Printed in China

PRECAUTIONS
To maintain good performance
� Do not use the unit in places which are extremely hot, cold, dusty or humid. In particular, do not keep the unit: � in a high humidity area such as a bathroom � near a heater � in an area exposed to direct sunlight (inside a parked car, where there could be a considerable rise in temperature) � Keep cassette tapes, magnetic cards and other magnetic recorded materials away from the speaker as the recorded information may be erased or noise may occur on cassette tapes.

A

MAINTENANCE
To clean the cabinet
Use a soft cloth lightly moistened with a mild detergent solution. Do not use the strong solvents such as alcohol, benzine or cleaner.

B

INSERTING A BATTERY FOR CLOCK AND TIMER � A
Open the battery compartment and insert an size AA (R6) battery for clock and timer. The battery for the clock and timer can be used for about 1 year. Replace the battery when the clock/timer operation does not work correctly.

Note
� You cannot set clock or timer without the battery for clock and timer. � You cannot listen to the radio only with the battery for clock and timer.

C

USING ON DRY CELL BATTERIES � B
Open the battery compartment and insert three size AA (R6) batteries with the 0 and 9 marks correctly aligned. Replace the batteries when the sound becomes distorted.

Note on dry cell batteries
� � � � � Make sure that the 0 and 9 marks are correctly aligned. Do not mix different types of batteries, or an old battery with a new one. Never recharge the batteries, apply heat to them or take them apart. When not using the batteries, remove them to prevent needless wear. If liquid leaks from the batteries, wipe thoroughly to remove.

SETTING THE CLOCK � C
1 Insert a battery for clock and timer referring to �INSERTING A BATTERY FOR CLOCK AND TIMER�. The clock starts running. 2 Pull the clock setting lever and turn it to set the clock. After setting the clock, set the lever to the previous position.

About the light of the clock panel
Keep the SNOOZE/LIGHT button pressed to turn on the light of the clock panel. The light turns off when the button is released.