jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 8 (kliknij aby zobaczyć)
FS-P7
Removing the tuner board (See Fig.4 and 5)
Prior to performing the following procedure, remove the metal cover. 1. Disconnect the card wire from connector CN1 on the tuner board. 2. Remove the screw D on the right side of the body. 3. Remove the two screws E on the rear panel.
D
CN1 board
Fig.4
Removing the CD mechanism assembly (See Fig.6 to 8)
Prior to performing the following procedure, remove the metal cover and the rear cover. 1. Disconnect the card wires from connector CN903, CN904 and the wire from CN905 on the main board on the upper side of the body. 2. Remove the screw D attaching the tuner board and the CD mechanism on the right side of the body. 3. Remove the two screws F attaching the rear panel and the CD mechanism on the back of the body. 4. Move the rear part of the CD mechanism assembly upwards to disengage the two joints a and release from the rear panel. Pull the front panel toward the front and move the rear part of the CD mechanism assembly upwards. Then pull out the CD mechanism assembly from the front panel backward. REFERENCE: To remove the CD mechanism assembly efficiently, disconnect the card wire connecting the tuner board with the main board in advance.
