Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 20 (kliknij aby zobaczyć)
CD Direct Recording
Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have made for Program play.
One Track Recording
This recording method is convenient when you record tracks while playing a CD. You can only record your favorite songs on the tape.
On the unit ONLY:
On the unit ONLY:
1 Put a recordable cassette in with the exposed
part of the tape down.
1 Put a recordable cassette in with the exposed
part of the tape down.
2 Place a disc correctly on the circle of the disc
tray, with its label side up.
� If the current playing source is not the CD player, press CD 3/8, then 7 before going to the next step. � If you want to record on both sides of a tape, see �To record on both sides � Reverse Mode.� � If you do not want pauses of about 4 seconds recorded between selections, press CD 3/8 twice. If nothing is done, non-recorded pause will be automatically recorded between selections.
2 Play the track on the CD you wish to record. 3 Press REC.
REC
The CD player returns to the beginning of that track and the track is recorded on the tape. After recording, the CD player and cassette deck automatically stop.
4 Repeat steps 2 and 3 to record other tracks
you want.
3 Press REC.
The REC indicator lights up on the display and recording starts. After recording, the CD player and cassette deck automatically stop.
REC
To stop CD Direct Recording, press 7. The tape stops after 4 seconds. To remove the cassette, press 0 for the cassette deck.
To record on both sides � Reverse Mode
Press REV.MODE on the unit until the indicator is lit.
REV.MODE
� When using the reverse mode for CD Direct Recording, start recording in the forward (3) direction first. When the tape reaches its end while recording a song in the forward direction (3), the last song will be rerecorded at the beginning of the reverse side (2). If you start recording on the reverse side (2), recording will stop when recording is done only on one side (reverse) of the tape.
When making SLEEP timer settings while doing CD Direct recording Set enough time to allow for the CD to finish playing; otherwise the power will go off before recording is completed.
