RICOH FT2070
Instrukcja Serwisowa

August 1, 1985

Lower Clamshell

(1) Front Cover (2 screws) 1. Open the clamshell to remove the
2. screws. Pull out the cassette holder to remove the front cover.

(5) Lower Left Cover (2 screws) 1. Remove the front cover (2 screws), the upper rear cover (2 screws), and lower rear cover (4 screws) to remove the lower left cover. (6) Exit Cover (2 screws)

NOTE: * When installing the front cover, be sure that the tabs engage with the positioning notches. (2) Manual Feed Guide 1. Open the clamshell. 2. Lift the manual feed guide and remove. (3) Lower Right Cover (2 screws) (4) Lower Rear Cover (4 screws) 1. Remove the upper rear cover (2 screws). 2. Open the clamshell and remove. NOTE: * Remember that one screw is longer than the other three screws. The longer screw prevents the upper paper feed guide plate from being turned over.

5-3