...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 55 (kliknij aby zobaczyć)
31 January 1996
INSTALLATION PROCEDURE (COPIER)
3.2 KEY COUNTER HOLDER INSTALLATION
[I]
[C] [H] [F]
[B] [A]
A170I521.img
[G] [D] [J] [E]
A170I522.img
N CAUTION:
Unplug the copier power cord before starting the following procedure. NOTE: The Key Counter Bracket Set includes the following parts. The key counter holder and key counter should be procured locally. 1. Key Counter Bracket ......................................... 1 2. Key Counter Plate Nut....................................... 1 3. Key Counter Cover ............................................ 1 4. Bushing.............................................................. 1 5. Screws ............................................................... 8 6. Clamp ................................................................ 1 1. Open the right front door and remove the right inner cover (3 screws). 2. Remove the dummy connector [A]. 3. Remove the right cover [B] (2 screws) and small cap [C]. 4. Connect the key counter holder [D] to key counter bracket [E] with key counter plate nut [F] (2 screws). 5. Run the key counter harness [G] through the bushing [H] and right cover hole [I] and fix the key counter harness (1 screw and 1 harness clamp). 6. Install the key counter bracket to the right cover (3 screws). 7. Set the key counter harness connector to the 4P connector from the copier. 8. Reinstall the right cover. 9. Install the key counter cover [J] (2 screws). 10. Reassemble the machine.
