INSTALLATION
WHEN USING THE UNIT ON A TABLETOP MOUNTING THE STAND WHEN USING THE UNIT WITH A MOUNTED WALL
CAUTION
� When mounting the air purifier to the wall, the mounted wall will become dirty as time passes. To prevent this, place a vinyl sheet, etc., around the unit. � A wall side to install is to choose the place to have the strength done firmly. � In the case of a wall or concrete wall with little strength, request installation to a specialist such as an electric appliance shop, etc. � Do not install in a location with heavy lampblack, such as in a kitchen, etc. The unit surface may crack as a result.
1 Remove the front panel.
� At this time, also remove the pre-filter, stamina-power carbon and the HEPA filter. Front panel 1
2
1
1 Determine the mounting location 2 Placefacing down on afront the unit with its side flat
and stable surface.
� Place a soft cloth, etc., to prevent damaging the unit.
75cm or more 69cm or more from the ceiling Size of main unit 75cm or more 75cm or more
Leave space around the bracket by referring to the illustration below. The unit cannot be mounted if there is insufficient spacing around the bracket.
3 Insert theholes on the stand tabs into the on the main
unit and fix the stand using the included thumbscrews (2 units).
Tabs Holes
Mounting bracket 1 60cm or more from 60cm or more sidewall from sidewall
CAUTION
Mount on a flat surface
� Do not mount the unit to a location that is not flat such as a wall with a door header, etc. Do not mount the unit to a thin wall with little strength such as a plasterboard, etc. The unit may fall and can be very dangerous.
