DOLBY PRO LOGIC
7 Adjust the sound of all the speakers until they are equal. When you are satisfied with the setting, press TEST TONE again to switch off the test signal. This setting is for a full Dolby Surround Pro Logic mode. � Press DPL to select the Dolby Surround mode. � The message �DOLBY C SURROUND� L R will be PRO LOGIC displayed. S S � The DPL display panel will light up.
M
Use this setting when full surround is not required, but a wide stereo sound is desired. It only requires the left, right and center speakers. � Press DPL to select the Dolby 3 Stereo mode. � The message �DOLBY 3 C STEREO� L R will be displayed. � The DPL display panel will light up.
S
PRO LOGIC
Note: � It is advisable to set the speakers� level at normal listening level. "XX" denotes the sound level.
When you have completed the Dolby Pro Logic setup, you are ready to enjoy Home Cinema sound. � Press DPL (PRO LOGIC) repeatedly to select and cycle through the various sound modes.
DPL
S
Dolby Center Phantom
This setting is for use without the center speaker. It redistributes the center speaker sound to the left and right speakers, providing conventional stereo across the front. � Press DPL to select the Dolby Pro Logic Center Phantom mode. � The message �CENTER C PHANTOM� L R will be
PRO LOGIC
L
BALANCE
R
Normal Stereo
This setting is for normal stereo sound without Dolby Pro Logic. It only requires the left and right speakers. � Press DPL to select the Stereo mode. � The message �STEREO� C will be L R displayed. PRO LOGIC S S � The DPL display panel will light up.
Dolby Surround � Center Phantom � Dolby 3 Stereo � Stereo � Dolby Surround �
� The Dolby Pro Logic display panel will light up with the selection.
displayed. � The DPL display panel will light up.
S
S
English
15
Dolby Surround
Dolby 3 Stereo
Important! 1 For the best Dolby Pro Logic sound, switch on DPL with DSC set to �Classic� and with Incredible Surround off. 2 Dolby Pro Logic mode will automatically switch to normal Stereo mode when headphones are connected. 3 Switch to normal stereo mode when you record on a tape.
