Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 20 (kliknij aby zobaczyć)
RECORDING
Notes: � At the end of side A, flip the tapes to side B and repeat the procedure. � Dubbing of tapes is only possible from tape deck 1 to tape deck 2. � To ensure good dubbing, use tapes of the same length. � You can listen to other source while dubbing.
English
20
CLOCK
Recording from other sources
(only on tape deck 2) 1 Press TAPE ( TAPE 1�2 ) to select tape deck 2. 2 Load a blank tape into tape deck 2 with the open side downward. 3 Press CD, TUNER or AUX. � Start playback of the selected source. 4 Press RECORD to start recording. � The REC flag starts flashing. 5 Press � to stop recording. Notes: � During recording, it is not possible to listen to another source.
View Clock
You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (CD, TUNER, etc.). The clock will be displayed for about seven seconds. � Press CLOCK�TIMER briefly. � �10:38 PM or 22:38� (the current time in either 12- or 24-hour mode) will be displayed depending on whether you have selected 12- or 24hour mode. � �--:--� will be displayed if the clock is not set.
Clock Setting
The clock can be set in either 12- or 24hour mode, e.g. �12:00 AM� or �00:00�. Before setting the clock, you must be in the View Clock mode. 1 Press CLOCK�TIMER to select clock mode. 2 Press PROGRAM to select 12- and 24hour mode. � If 12-hour mode is selected, �12:00� starts flashing and the AM lights up. � If 24-hour mode is selected, �00:00� starts flashing. 3 Set the hour with à or á on the system. 4 Set the minute with à or ë on the system.
Digital Recording via Digital Out
For CD digital recording, please refer to the Instructions Manual of the CD Recorder, digital audio equipment, etc.
