17
Storing Preset Stations
You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Automatic programming 1 Press TUNER (FM�AM). 2 Press PROG for more than one second. � The PROGRAM starts flashing and �AUTO� will be displayed. � The system will search for every available radio station in the FM waveband first, then search the AM waveband. � All available radio stations will be stored automatically. The frequency and preset number will be displayed briefly. � The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used. � The system will remain tuned to the last stored preset radio station. Notes: � You can cancel the automatic programming by pressing PROG or � (on the system only).
TUNER
� If you want to reserve a section of preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming, only the preset numbers 10 to 40 will be programmed. Manual programming 1 Press TUNER (FM�AM). 2 Press TUNER (FM�AM) again to select the desired waveband : FM or AM. 3 Press PROG for less than one second. � The PROGRAM starts flashing. � The next available preset number will be displayed for selection. 4 Press à or á to tune to the desired frequency. � If you wish to store the radio station to another preset number, press 4 or 3 to select the desired preset number. 5 Press PROG again. � The PROGRAM disappears and the radio station will be stored. � Repeat steps 3 � 5 to store other preset radio stations. Notes: � When 40 radio stations are stored and you attempt to store another radio station, the display will show "FULL�. If you want to change an existing preset number, repeat steps 3 � 5. � You can cancel manual programming by pressing � (on the system only). � During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically.
Tuning to Preset Radio Stations
� Press 4 or 3 to select the desired preset number. � The preset number, radio frequency, and waveband appear on the display.
