PHILIPS FW-C85/30
Instrukcja Obsługi

TIMER
5 Press CLOCK/TIMER to store the start time. � The timer is now set. � The TIMER remains on the display. � At the preset time, the timer will be activated. � The selected source will be played. To switch off the TIMER � Press TIMER ON/OFF on the remote control. � The timer is now switched off. � The display will show "CANCEL" and the TIMER disappears. To start the TIMER again (for the same preset time and source) � Press TIMER ON/OFF on the remote control. � The timer is now on. � The TIMER appears on the display.

SLEEP TIMER
This feature allows you to select a length of time after which the system will switch to the standby mode automatically. 1 Press SLEEP on the remote control repeatedly to select a period of time. � The selections are as follows (time in minutes): 60 � 45 � 30 � 15 � OFF � 60 � � "SLEEP XX" or "OFF" will be displayed. "XX" is the time in minutes. 2 When you reach the desired length of time, stop pressing the SLEEP button. � After this amount of time passes, the system will switch to the standby mode. To switch off the Sleep Timer � Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button. English
25

Sleep (only on remote control)

Notes: � During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. � If the source selected is TUNER, the last tuned frequency will be switched on. � If the source selected is CD, playback will begin with the first track of the selected disc or program. If the CD trays are empty, TUNER will be selected instead. � If the source selected is TAPE, and if the preset time is reached during high speed dubbing, the TUNER will be selected instead. � The timer will not activate if a recording is in progress.

pg 01-29/C85-C83/22-Eng

25

3/6/00, 1:01 PM

3139 116 19611