Viewing the clock
The clock (if it is set) will be shown in Standby mode. Press CLOCK on the system to view clock in any source mode. Setting the clock - see Preparations.
deck .
3 4 5
Press O or P on the system (or on the remote control) to set the hours Press 1 or ¡ on the system (or on the remote control) to set the minutes. Press TIMER/SLEEP to store the setting. � �TIMER ON� will be displayed for 5 seconds. � The timer will start to work. � The timer will always be switched on once it has been set. Note: � The timer must be set in standby mode.
Setting the timer
The system can switch to DISC, TUNER , USB or TAPE mode automatically at a preset time, serving as an alarm to wake you up. IMPORTANT ! � Before setting the timer, ensure that the clock is set correctly. � The timer will always be switched on once set. � The timer will not start if a recording is in progress. � The time can be set in 24-hour mode.
To exit without storing the setting � Press 7 on the system. To deactivate the timer � When the timer has been set, press and hold TIMER /SLEEP for more than 3 seconds to enter timer setting mode, and then press and hold TIMER /SLEEP again for more than 3 seconds to deactivate the timer. ��TIMER OFF� will be displayed.
1
In standby mode, press and hold TIMER/SLEEP on the remote control more than 3 seconds . � The selected source will be displayed. Press DISC,TUNER , USB or TAPE/AUX to select timer mode. The corresponding source will appear on the display. DISC - load the disc. TUNER - Tune to the desired radio station. USB - Play USB directly. TAPE - Load the prerecorded tape into tape
