PHILIPS FWP75037
Instrukcja Obsługi

Tape Operation/Recording
To rewind or fast forward during playback G Press and hold à or á until the desired passage is reached, then release. � The tape continues playing. G The tape will stop automatically at the end of the tape during rewinding or fast forwarding. � During searching, the sound is reduced to a low volume. To rewind or fast forward when playback is stopped Press à or á. Press � when you reached the desired passage. G If �CHECK TAPE� is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the opening. Do not cover the Cr02 tape detection hole when covering the tab opening.

E n g l i s h

1 2

To reset tape counter number G When in stop mode, press�. � �TP1 000� or �TP2 000� will be displayed. Notes: � During rewinding or fast forwarding of a tape, it is also possible to select another source (CD, TUNER or AUX, for example). � The tape counter will automatically set to zero after detecting end of tape.

IMPORTANT! � Recording is permissible if copyright or other rights of third parties are not infringed upon. � Recording is possible only on tape deck 2. � Switch off Dolby Pro Logic when recording.

Preparation for Recording 1 2 3
Press TAPE (TAPE 1�2) to select TAPE 2. Load a recordable tape into tape deck 2 with full spool to the left. Prepare the source to be recorded. CD � load the disc(s). TUNER � tune to the desired radio station. TAPE � load the prerecorded tape into tape deck 1 with the full spool to the left. AUX � connect external equipment.

General Information on Recording
G For recording, use only tape of IEC type I (normal tape) or IEC type II (Cr02). G The recording level is set automatically, regardless of the position of the Volume, VAC, DSC and so forth. G The tape is secured at both ends with leader tape. At the beginning and end of the tape, nothing will be recorded for six to seven seconds. G To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect.

When recording is in progress � starts flashing. G It is not possible to listen to another sources except when dubbing tapes. G It is not possible to activate the timer function.

One Touch Recording 1 2 3
Press CD, TUNER or AUX to select the source. Start playback of the selected source. Press REC to start recording.

To stop recording G Press � on the system. Note: � One Touch Recording is not possible in TAPE mode, "SELECT SOURCE" will be displayed.

24
pg 001-031/P750/37-Eng 24 3/7/01, 4:12 PM

3139 115 20621