PHILIPS FW-V55/21M
Instrukcja Obsługi

CLOCK
5 Press CLOCK/TIMER again to store the setting. � The clock starts. � To exit without storing the setting, press � on the system.

TIMER
� The system can switch on to VCD, TUNER, or TAPE 2 mode automatically at a preset time. It can serve as an alarm to wake you up. � Before setting the timer, make sure the clock is set correctly. � The timer will always be switched on once it is set. � The volume of the timer will increase from the minimum level until the volume level before the set is switched to standby mode. 1 Press and hold CLOCK/TIMER for more than 2 seconds to select timer mode. � � AM 12:00� or �00:00" or the last timer setting starts flashing depending on whether you have selected 12- or 24-hour mode. � The TIMER starts flashing. � The selected source is lit while other available sources are flashing. 2 Press VCD, TUNER or TAPE to select the desired source. � Before selecting VCD or TAPE, make sure a disc or tape is loaded in the disc tray or tape deck 2. 3 Press à or á on the system to set the hour for the timer to start. 4 Press í or ë on the system to set the minute for the timer to start.

Notes: � During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically. � When a power interruption occurs, the clock setting is erased.

Notes: � During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. � If the source selected is TUNER, the last tuned frequency will be switched on. � If the source selected is VCD, playback will begin with the first track of the disc tray 1 or other trays if disc tray 1 is empty. If all the disc trays are empty, the TUNER will be selected instead. � If the source selected is TAPE, and if the preset time is reached during high speed dubbing, the TUNER will be selected instead. � The timer will not activate if a recording is in progress.

To start the TIMER again (for the same preset time and source) 1 Press and hold CLOCK/TIMER for more than 2 seconds. 2 Press CLOCK/TIMER again to store the start time. � The timer is now on. � The TIMER appears on the display.

pg 01-28/V55/21-En

25

6/8/01, 9:12 AM

3139 115 20042

English
25

Timer Setting

5 Press CLOCK/TIMER to store the start time. � The timer is now set. � The TIMER remains on the display. � At the preset time, the timer will be activated. � The selected source will be played.

To switch off the TIMER 1 Press and hold CLOCK/TIMER for more than 2 seconds. 2 Press � on the system to cancel the timer. � The timer is now switched off. � The display will show "OFF" and the TIMER disappears.