PHILIPS FW-V785/21M
Instrukcja Obsługi

Tape Operation/Recording
General Information on Recording
G If you do not intend to record via the microphone, unplug the microphone to avoid accidental mixing with other recording source. G For recording, use only tape of IEC type I (normal tape). G The recording level is set automatically, regardless of the position of the Volume, VAC, DSC and so forth. G The tape is secured at both ends with leader tape. At the beginning and end of the tape, nothing will be recorded for six to seven seconds. G To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect.

Preparation for Recording 1 2 3
Press TAPE (TAPE 1�2) to select TAPE 2. Load a recordable tape into tape deck 2 with full spool to the left. Prepare the source to be recorded. VCD � load the disc(s). TUNER � tune to the desired radio station. TAPE � load the prerecorded tape into tape deck 1 with the full spool to the left. AUX � connect external equipment. When recording is in progress � starts flashing. G It is not possible to listen to another sources except when dubbing tapes. G It is not possible to activate the timer function.

E n g l i s h
26

One Touch Recording/Recording the mixed sound 1
Press VCD, TUNER or AUX to select the source. G You can connect a microphone to record the mixed sound in tape deck 2 (refer to �Karaoke Microphone Mixing�). 2 Start playback of the selected source. 3 Press REC to start recording. To stop recording G Press � on the system. Note: � One Touch Recording is not possible in TAPE mode, "SELECT SOURCE" will be displayed.

G If �CHECK TAPE� is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the opening.

IMPORTANT! � Recording is permissible if copyright or other rights of third parties are not infringed upon. � Recording is possible only on tape deck 2.

CD/VCD/MP3-CD Synchro Recording 1
Press VCD to select the disc. G Press í or ë to select the desired track to start recording. G You can programme the tracks in the order you want them to be recorded (refer to �CD/VCD/ MP3-CD Operation - Programming the disc tracks�). 2 Press REC to start recording. � The disc will start playback automatically.

pg 001-032/V780&785/21-Eng

26

12/11/01, 5:15 PM 3139

115 21143