Adjusting Rinse Aid Dosing
The dose should be adjusted according to the finish and drying results obtained. The dose is factory set at 4, and can adjusted from 1 to 6. Gradually increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce if it there are sticky whitish streaks on the dishes. 0 1. Turn the lid of the container ¼ of a turn anticlockwise and remove. 2. Adjust the dose setting with a tea spoon. 3. Replace the lid and tighten by turning clockwise. 4. If rinse aid has run out, wipe up with a cloth.
