Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 26 (kliknij aby zobaczyć)
q
q
If the setting of the programme has been made with the door closed: the dishwasher will start the countdown automatically after 5 seconds from the last pressure of a push button. Once the delay set has elapsed the programme will start automatically, the indicator lights of the phases turn off except for the light of the phase under way. The displayed time will start to decrease from minute to minute.
9. At the end of the washing programme
q
q
q
The dishwasher will automatically stop and an audible signal informs you that the programme has ended. In the display appears 000 and the indicator lights of the programme and phases turn off. The washing programme has ended completely only when you hear an audible signal and the indicator lights of the programme and of the phases (included drying phase) will turn off. If you do not wait for the end of the washing programme it will not be possible to set a new programme, if not after having cancelled the previous one. Press the ON/OFF push button to switch the dishwasher off and open the door. Wait a few minutes before removing the dishes, in this way they will be cooler and the drying will be improved. Empty the lower basket first and then the upper one, this will avoid water dripping from the upper basket onto the dishes in the lower one. When the wash programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.
10. To cancel a programme
q q
q
q
This is possible either with an open or closed door. To cancel a wash programme in progress, press for about 5 seconds the push button of the programme in progress. Once past 5 seconds the dishwasher returns to setting mode and a new washing programme can be selected. This is valid also for the delay start. During the setting of a programme with the door open, to cancel the setting simply press the ON/OFF push button. Before the elapse of the 5 seconds from the last pressure of a push button, to cancel the setting simply press the ON/OFF push button.