PHILIPS GC4325/02
Instrukcja Obsługi

4

ENGLISH

Important
Read these instructions for use carefully before using the appliance and save them for future reference. � Check if the voltage indicated on the type plate corresponds to the local mains voltage before you connect the appliance. � Only connect the appliance to an earthed wall socket. � Do not use the appliance if the plug, the cord or the appliance itself shows visible damage, or if the appliance has been dropped or is leaking. � Check the cord regularly for possible damage. � If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. � Never leave the appliance unattended when it is connected to the mains. � Never immerse the iron and the stand, if provided, in water. � Keep the appliance out of the reach of children. � The soleplate of the iron can become extremely hot and may cause burns if touched. � Do not allow the cord to come into contact with the soleplate when it is hot. � When you have finished ironing, when you clean the appliance, when you fill or empty the water tank and also when you leave the iron even for a short while: set the steam control to position 0, put the iron on its heel and remove the mains plug from the wall socket. � Always place and use the iron and the stand, if provided, on a stable, level and horizontal surface. � Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. � This appliance is intended for household use only.

Before first use

C

1

Remove the heat-resistant protective cover from the soleplate (GC4340 only). Remove any sticker or protective foil from the soleplate.

B

The iron may give off some smoke when you use it for the first time.This will cease after a short while.