GRUNDIG GDP5100
Instrukcja Serwisowa

Xenaro � GDP 51�, GDP 6150

Allgemeiner Teil / General Section

PICTURE SETTINGS ____________________________________________________________________
Setting the gamma correction
The gamma setting is used to calibrate the colour palette on your screen. You can use it to adjust the grey colour tones in light and dark scenes. The normal screen setting has a gamma value of 1.0.
Gamma correction 0.761 dark 0.815 0.873 0.937 1.000 neutral 1.070 1.146 1.227

1 Press »i« to call up the main menu. 2 Select the »Picture« menu with »S« or »A« and activate it with »OK«, or
select it directly with »1 ... 0«.

3 Select the » Gamma correction« line with »S« or »A« and activate it with
»OK«.

select and choose

4 Select the desired value (»0.761 dark« to »1.315 bright«) with »S« or
»A« and confirm your selection with »OK«.

5 Press »i« to quit the menu.

Selecting filter functions
Picture 1 Format 2 Gamma correction 3 Extended settings Letterbox 1.000 neutral

1 Press »i« to call up the main menu. 2 Select the »Picture« menu with »S« or »A«activate with »OK«, or
select directly with »1 ... 0«.

select and choose

exit back

3 Select the »Extended settings« line with »S« or »A« and activate with
»OK«.

Note: For further operation, see the following sections, each one starting from Step 1.

40

PICTURE SETTINGS ____________________________________________________________________
Adapting the colour bandwidth
Chroma filter Off CVBS S-Video

Here you adapt the colour bandwidth in order to avoid disturbance or flickering in the colour reproduction. You can choose between »Off«, »CVBS« and »S- Video«. This depends on the video signal.

1 Select the » Chroma filter« line with »S« or »A« and activate with »OK«. 2 Select the desired setting (»CVBS« or »S-VIDEO«) with »S« or »A« and
select and choose

press »OK« to confirm. Note: When the »Off« line is selected, the colour filter is switched off.

Selecting the horizontal filter
Horizontal filter Crisp Medium Soft

This setting optimises the soft focus function, computer graphics and photos when playing back a video CD.

1 Select the » Horizontal filter« line with »S« or »A« and activate with
»OK«.

2 Select the desired setting (»Crisp«, »Medium« or »Soft«) with »S« or »A«
select and choose

and press »OK« to confirm.

Vertical filter
Vertical filter Normal Anti-flicker

This setting optimises the flicker-reduced reproduction of computer graphics and photographs when playing back a video CD.

2 Select the desired setting (»Normal« or »Anti-flicker«) with »S« or »A«
and press »OK« to confirm.
select and choose

3 Press »i« to quit the menu.

41

GRUNDIG Service

ENGLISH

1 Select the » Vertical filter« line with »S« or »A« and activate with »OK«.

1 - 19