WHIRLPOOL GDU4050XPW1
Instrukcja Obsługi

Before starting your dishwasher
1. Spin the Upper Spray Arm to make sure nothing will stop it from turning freely. 2. Push door firmly when closing and it will automatically latch. 3. Run hot water at sink nearest dishwasher until it is hot. Turn it off.

Starting your dishwasher
DUAL WASH Cycle...
1. Select a drying option. 2. Turn Cycle Control Knob clockwise to dot marked DUAL WASH. The dishwasher will automatically start that cycle.

PRE-WASH PLUS NORMAL WASH Cycle...
1. Select a drying option. 2. Turn Cycle Control Knob clockwise to dot marked PRE-WASH PLUS NORMAL. The dishwasher will automatically start that cycle.

LOW ENERGY NORMAL WASH Cycle...
1. Select a drying option. 2. Turn Cycle Control Knob clockwise to dot marked LOW ENERGY NORMAL. The dishwasher will automatically start that cycle.

RINSE & HOLD Cycle...
1. Select AIR DRY OPTION only. 2. Turn Cycle Control Knob clockwise to dot marked RINSE 81 HOLD. The dishwasher will automatically start that cycle.

Changing a setting
You can change a setting any-time during any cycle. 1. Press in the doer latch to unl&ch the door and stop the cycle. 8

2. Turn the Cycle Control Knob clockwise to the cycle you want. 3. Be sure the detergent dispensers are filled properly for the new cycle. 4. Close and latch the door. The dishwasher automatically start the new cycle. will