jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Activating the parental lock of the DVD player
Films on DVD may be wholly or partially unsuitable for children. Such DVDs contain information which identifies these scenes, providing them with ratings from 1 to 8. You can select one of the ratings and thereby authorise alternative scenes for playback.
AUDIO DIGITAL OUT DOWNMIX DUAL MONO DYNAMIC RNG EXIT SETUP OFF Dolby PL STEREO 0
Custom settings in the »AUDIO« menu
1 Press »SETUP « to call up the main menu. 2 Select the »AUDIO « menu by pressing »a« or »s«.
Note: For further operation, see the following sections, each one starting from Step 1.
1
LOCK 1 KID CHANGE
Switch the DVD player to STOP by pressing »STOP/RETURN
7«.
��æ
II
SETUP
2 Call up the menu by pressing »SETUP «.
� The » AUDIO« menu appears.
Selecting audio types for the digital output
The audio type must be selected according to the connected decoder/amplifier.
II
SETUP
3 Select the »LOCK« menu (parental lock) by pressing »s«. 4 Select the »PARENTAL« line with »S« and press »s« to activate it.
LOCK AUDIO DIGITAL OUT DOWNMIX DUAL MONO DYNAMIC RNG EXIT SETUP
\��æ
1 Select the »DIGITAL OUT« line with »S« or »A« and press »s« to
activate.
>> OFF ORIGINAL PCM
PARENTAL PASSWORD EXIT SETUP
\��æ
II
SETUP
>>D 1 KID 2 3 4 5 6 7 �8 ADULT
5 Select the desired rating (1 to 8) using »A« or »S«, and press »SELECT«
to confirm.
2 Select the format using »S« or »A« and press »SELECT« to confirm.
Note:
II
SETUP
6 Enter the current code number with »1�0 « and press »SELECT« to
confirm. � The selected rating is highlighted in green.
LOCK
With the »OFF« setting the digital audio output (»DIGITAL AUDIO OUT COAXIAL« socket) is switched off.
3 Quit the menu with the »SETUP « button.
7 Conclude the setting by pressing »SETUP «.
Note: If a DVD with the rating you selected is loaded into the player, and you have to enter the four-digit code number. To deactivate this function, repeat steps 1 to 5 and press »A« or »S« to select » 8 ADULT«. If you forget or lose the code number, read the section entitled �Rectifying minor problems� on Page 32.
CURRENT PASSWORD
XXXX
Selecting Dolby Surround or Stereo
If a Dolby Digital decoder is connected, select »Dolby PL«. If a Stereo system is connected, select »STEREO«.
1 Select the » DOWNMIX« line with »S« or »A« and press »s« to activate.
AUDIO DIGITAL OUT DOWNMIX DUAL MONO DYNAMIC RNG EXIT SETUP
\��æ
>>
Dolby PL STEREO
2 Select the setting using »S« or »A« and press »SELECT« to confirm. 3 Quit the menu with the »SETUP « button.
II
SETUP
Changing the code number
1 Switch the DVD player to STOP by pressing »STOP/RETURN 7«.
LOCK PARENTAL PASSWORD EXIT SETUP AUDIO DIGITAL OUT DOWNMIX DUAL MONO DYNAMIC RNG EXIT SETUP
Selecting audio types for the analogue output
1 Select the » DUAL MONO« line with »S« or »A« and press »s« to
activate.
>> STEREO LEFT MONO RIGHT MONO MIXED MONO
2 Call up the menu by pressing »SETUP «.
� The » AUDIO« menu appears.
2 Select the desired setting using »S« or »A« and press »SELECT« to
confirm. » STEREO« The left channel on the left loudspeaker, the right channel on the right loudspeaker » LEFT MONO« The left channel on the left and right loudspeakers » RIGHT MONO« The right channel on the left and right loudspeakers » MIXED MONO« The left and right channels on both loudspeakers
>>
�
CHANGE
3 Select the »LOCK« menu (parental lock) by pressing »s«.
SETUP
\��æ
II
SETUP
\��æ
II
4 Select the »PASSWORD« line by pressing »S« and then use »s« and
»SELECT« to activate it.
LOCK
5 Enter the old code number with »1 � 0 «. 3 Press »SETUP « to exit the menu. 6 Enter the new four-digit code number with »1 � 0 «.
Enter the four-digit code number again with »1 � 0 «.
