jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
Tekstowy podgląd strony 30 (kliknij aby zobaczyć)
Information and Communication Products
6.7.11 RLR (earphone-path faulty) Fault code: D 20 Affected unit: Components: Earphone Needed equipment: Multimeter Working material: none Diagnosis: The diaphragm of the earphone could be affected by deposits with increasing age. There will be a higher attenuation when measuring RLR (receiving loudness rating). In most cases the earphone is defective. If there is no noise audible on the earphone when making a sidetone check it�s also possible that the wire of the coil is cut off. Check the resistance of the coil with a multimeter. It must be about 150 ohms. If you measure a nearly infinitely high resistance, the wire may be cut off. Repair by component exchange: Use new earphone capsule. Test: Put the repaired board in a testhousing. Make a sidetone check by blowing into the microphone and checking the volume of the noise on the earphone. If there is a telephone tester with acoustic testhead make a RLR-test and check whether the attenuation is o.k.. Gigaset 3000 Classic/ Comfort
