variation occurs. Note: Clean with Isopropyl Alcohol only. Belt may be changed under heavy use but it will require re-calibration. Comment: Two types of oil are supplied with your turntable, numbered 1 and 2. The first one has lowest viscosity, and if use, will result in a tonal balance that is very slightly brighter than # 2. Start with # 1 when filling shaft assembly (16). Results obtained will vary with your system depending on operation temperature, acoustic, and other components in your system. Three bottles of each type are provided.
Running-in time :
The Goldmund Reference shaft and axis are machined with extreme precision. The optimal performance can only be reached after approximately 100 hours of use, despite a working period of 50 hours minimal at the factory.