PREPARATIONS
Caution: Keep the DC Power switch of the camera in the OFF position through the installation.
GP-KS822H with GP-AD22TA and optional Cmount lens
1. Remove the front cap of the camera head and confirm that the surface of the optical filter of the camera head is clean.
GP-KS822H with GP-LM3TA, GP-LM7TA, GPLM15TA or GP-LP12TA
1. Remove the front cap of the camera and confirm that the surface of the optical filter of the camera head is clean.
Front Cap
Front Cap
If the surface of the optical filter is dirty or dusts are on it, clean it up with a blower brush which is for film camera lenses (may be available at your local camera store) or supplied lens cleaning paper. 2. Attach the optional C-mount lens to the C-mount Adaptor GP-AD22TA by rotating it clockwise.
If the surface of the optical filter is dirty or dusts are on it, clean it up with a blower brush which is for film camera lenses (may be available at your local camera store) or supplied lens cleaning tissue paper. 2. Rotate the focus lock ring fully clockwise. Mount the Pinhole Lens, Wide-angle Lens or Super Wideangle Lens to the camera by rotating it clockwise slowly.
3. Rotate the focus lock ring fully Mount the lens and C-mount adaptor by rotating them clockwise slowly.
Focus Lock Ring
Focus Lock Ring
Caution: If the optional C-mount lens size exceeds 50.8 mm {2�} in diameter, 70 mm {2-3/4�} in length and 300 g {0.66 lbs} in weight, both the camera and lens should be secured.
