JVC GR-AX999UM
Instrukcja Obsługi

EN

57

Protect
This mode helps prevent accidental erasure of images. Put a padlock mark next to the desired still image, and that still image cannot be deleted.

ACCESS MENU SCREEN

1
Set the System Select Switch to �D.S.C.�. Viewfinder
MENU INDEX SLIDE SHOW 1 SLIDE SHOW 2 PROTECT DELETE

Press the MENU Jog Dial.

MENU Jog Dial

ACCESS PROTECT MENU SCREEN

2 3

Rotate the MENU Jog Dial to move the highlight bar to �PROTECT�, then press it. �If you do not want to perform �Protect� for any still image, go to step 4.

SET PROTECT
Rotate the MENU Jog Dial to move the frame to the desired still image, then press it. The padlock mark appears above the selected image. �On the Protect Menu Screen, all still images are displayed six at a time. To perform �Protect� for the still images that come after the 6th one, rotate the MENU Jog Dial to move the frame from Index No. 1 to No. 6, then rotate it further downward. The frame is placed automatically on the 7th still image. Images after the 7th one can also be accessed in the same way. �To complete �Protect�, go to step 4.

4MENU END

Menu Screen <PROTECT>
02 03

EX I T
01

04

05

06

Protect Menu Screen
EX I T
01

CLOSE MENU

4

Rotate the MENU Jog Dial upward to place the highlight bar on �EXIT�, then press it twice.

<PROTECT>
02 03

To remove �Protect�. . .
Perform steps 1 and 2, rotate the MENU Jog Dial to move the frame to the desired still image with the padlock mark, then press it. The padlock mark located above the still image disappears and the image is no longer protected. When finished removing protection, perform step 4.

04

05

06

A padlock mark appears.

NOTES:
� To move the frame from Index No. 7 to 6, place the highlight bar on �EXIT� by rotating the MENU Jog Dial upward. Rotate the MENU Jog Dial further upward. The frame is moved to the 6th still image automatically. Perform the same procedure for still images that follow the 13th one. � On the Protect Menu Screen, a star mark is displayed next to a still image you shot in the FINE mode.