JVC GR-AXM1U
Instrukcja Obsługi

36
Random Assemble Editing [R.A.Edit]
Create edited videos easily using your camcorder as the source player. You can select up to 8 �cuts� for automatic editing, in any order you like. R.A.Edit is more easily performed when the optional RM-V700U MBR (Multi-Brand Remote) is set to operate with your brand of VCR (see VCR CODE LIST), but can also be performed by operating the VCR manually.

EDITING (cont.)
SET REMOTE/VCR CODE

SET REMOTE TO OPERATE VCR

1

Turn off the power to the VCR and point the remote toward the VCR�s infrared sensor. Then, referring to the chart on the left, press and hold MBR SET, and press button (A) and then (B). �The code is automatically set once you release the MBR SET button, and the VCR�s power comes on.

OPERATE THE VCR

2
MBR SET VCR CTL
0

Make sure the VCR�s power is on. Then, while holding VCR CTL, press the button on the remote for the desired function. The functions the remote can control are PLAY, STOP, PAUSE, FF, REW and VCR REC STBY (you don�t need to press VCR CTL for this one).

You�re now ready to try Random Assemble Editing.

1 4 7

2 5 8

3 6 9

IMPORTANT
Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions.

RM-V700U (optional)

VCR CODE LIST
VCR BRAND BUTTONS NAME (A) (B) GE 11 92 9` 94 HITACHI 66 63 JVC A 91 B 96 C 93 95 MAGNAVOX 11 71 76 MITSUBISHI 67 68 NEC 37 38
PHILIPS

NOTES:
VCR BRAND BUTTONS NAME (A) (B) PHILIPS 12 33 PANASONIC 13 17 11 94 18 RCA 92 94 66 63 9` SANYO 36 35 15 SHARP 1` SONY 65 6` 39 31
TOSHIBA ZENITH

� If the VCR�s power doesn�t come on in step 1, try another code from the chart. � Some brands of VCR don�t come on automatically. In this case, turn the power on manually and try step 2. � If the RM-V700U is not able to control the VCR, use the controls on the VCR. � The RM-V700U cannot be used to operate the camcorder.

MAKE CONNECTIONS

CONNECT TO . . .

1
2

A

JVC VCR EQUIPPED WITH REMOTE PAUSE TERMINAL

1 9 1 9 9 9

9 5 1 4 1 6

Connect the editing cable to the Remote PAUSE terminal.
B

69 61 16

JVC VCR NOT EQUIPPED WITH REMOTE PAUSE TERMINAL

Connect the editing cable to the R.A.EDIT connector.
2

C

NON-JVC VCR WITH NEITHER

Connect the editing cable to the RM-V700U's Pause-In jack. All other connections are as shown in the illustration on page 37.

CONTINUED ON NEXT PAGE